Timer signal light (operating hours)
timer signal indicator
This light shows the signal when the equipment is working. With the help of this simple and cheap tool, we find out how many hours and minutes this device or equipment has been working. The timer signal light product is provided with a 3-year unconditional warranty.
3,250,000 $
Availability: 5 in stock
عضویت در خبرنامه JBH
Technical description
Measurement range: 0 to 999 hours – 0 to 60 minutes
Working voltage: 110 to 240 volts AC
Color: single color white
Cutting dimensions: 22 mm round punch (standard for signal lights)
instruction
When the power is turned on, the signal starts counting, and when the power is cut off, the signal timer stops. Now, if the black and red wires of the signal collide for a moment in the energized state, the counting will stop and start with the next pulse, and if the connection is established for a longer time, the timer will be reset.
Application:
1- Use on all types of electric motors, pumps and all equipment that needs periodic service and maintenance.
2- Power generators such as electric motors and diesel generators
In the matter of maintenance and repairs of equipment, the duration of operation is a very key and fundamental indicator.
To understand more about its use, consider the following example:
An air compressor needs to change the filter every 500 hours, by placing this signal light, we can perform the required service at the specified time.
This timer signal lamp has two rows of seven segments, the upper seven segment in which the word h is written shows the hour.
The lower seven segment, which has the letter m, represents the minute.
It is possible to buy this product and other products such as volt-ampere signal lamp through the jbh website.
| Measurement range | color | Product Name | shape | |
| 0…999H |
|
Signal timer (work hours) |
 |
How to wire:
Also, the wiring of this product is such that the x1 and x2 signal bases can be seen behind this light, which can be used to discuss feeding and starting timing; Also, two wires have been removed from the product, which is responsible for the issue of resetting.
The dimensions of the timer signal light
Working conditions of the timer signal light
| description | No. |
| ambient temperature: -25°C…70°C | 1 |
| relative humidity: ≤98% | 2 |
| nomally workable when vibration frequency is 2-80Hz with acceleration of.0.7g | 3 |
| pollution degree is 3 , installation group is III | 4 |
| marked can work at damp-heat environment. | 5 |
Technical specifications of the timer signal light
| Accuracy: 0.2% | 1 |
| Colour:Withe | 2 |
| shape of signaling unit head : Round | 3 |
| Body material: Flame Retardant plastic | 4 |
| IP(degree of protection): IP65(front face) confiming to IEC 60529 | 5 |
| Weight: 0.02 Kg | 6 |
| Tightening torque: 0.8 …. 1 N.m conforming to EN 60947-1 | 7 |
| Body Dimention: Diameter: 22 mm Height: 50.5 mm | 8 |
| Terminals description ISO n°1 : (X1-X2) PL | 9 |
| Power frequency withstand voltage: 2.5kv / 1min (effective AC value) | 10 |
| insulation resistance: 22MQ | 11 |
| Allowable voltage fluctuation: ±20% | 12 |
| Continuous operating life: ≥30000H | 13 |
| Brigtnss: > 100cd/ m² | 14 |
| Protection degree of the head IP65, IP67 is available on request | 15 |
| Applicable standard: IEC60947-5-1 | 16 |
| Applying frequency: AC50-60Hz.professional control of button switch indicator light | 17 |
| Order code | 12900 |
|---|---|
| Product technical code | JRAD16-22Tim-R-WH |
| number in the box | 10 |
| number in the box | 100 |
Reviews
There are no reviews yet.
Related products
-
signal lightswattmeter signal light
-
signal lightsCounter signal light
-
signal lightsTriple signal light
-
signal lightsAmmeter signal light
Reviews
There are no reviews yet.