start stop knob

Today, a variety of electrical equipment has been produced, each of which has a different function depending on the type of function. Shasti step starter is an example of this equipment, whose main function is to turn on and off the contactor and the three-phase load.

JBH electrical equipment online store offers all types of push starters with the best price and 3 years unconditional replacement warranty. In order to place an order, view the price, and buy Start Step Shasti, just add the desired quantity to your shopping cart and then complete your purchase.

 

Buy and check the price of Step Start

When purchasing and inquiring about the price of the Step Start push button, you must refer to reputable stores and manufacturers; Because this equipment is often purchased for the purpose of controlling and managing industrial devices. JBH is one of the most reliable and well-known manufacturers in this field. To find out about the price list and to buy the Step Start push button, just visit the products page of the JBH website and consult with our experts in the JBH collection if needed.

We suggest you to pay attention to the following factors before buying a Start Step wristband:

 

Quality and authenticity

It is quite natural that the higher the quality of a product, the higher its price. The important thing about electrical equipment is that in this area, it is better to think more about the originality of the equipment than the cost of the equipment; Because the use of counterfeit products with low prices will cause irreparable damages; As a result, be sure to be careful enough in this area to get original and quality products.

However, the declaration of the high quality of a product alone cannot put a stamp of relief on your imagination; Sub-quality is an abstract concept. In other words, you should pay attention to the examples of quality when buying Shasti Start Step; For example, we at JBH store offer all our products with a 3-year unconditional replacement warranty; This means that we are fully confident and guarantee the high quality of our products.

 

Price

It is true that you should not make the initial price of the start step your main factor for buying; But it is not wise to ignore it either; Because it may trap you in the trap of people who sell their low-quality products at a high price and in the name of the original product; In this regard, JBH is trying to avoid the unreasonable high prices of electrical equipment by offering the starter step at a fair price.

 

brand

Some brands offer their products at a higher price than usual due to their longer working history and greater reputation; But JBH, one of the new and knowledge-based brands in the field of electrical equipment, offers its best products at a reasonable and fair price with the aim of satisfying customers.

 

What is Shasti Start Step?

The purchase of a push start step is done with the purpose of turning off and on the contactor and all types of loads such as three-phase motors by installing it in the electrical panel. This equipment is one of the types of metal switch and has different models in terms of external shape, color, signal or operator.

In the old days, if you wanted to buy any type of thumb, you had to specify exactly what kind of thumb you need; Because in the old days, the number of platinums and operators of these products could not be edited and had a fixed structure; But today, shasti are produced in a modular way; In this way, by adding separate parts, you can experience many applications with just one small device; Step start push buttons are also one of the types of modular push buttons.

 

Types of start step thumbs

• The types of Start Step thumbs are:
• pressure
• Selector switch
• Fungal rash
• key thumb
• Shasti start stop
• Emergency push buttons

Shasti are classified in different categories due to their appearance and color, the type of operator installed in it, and whether or not they have a signal light.

In the following, the specifications of JBH Start Step push buttons are listed:

• 16 mm size: in two types 220V and 24V and in 7 colors
• 19 mm size: in two types 220V and 24V and in 7 colors
• Size 22 mm: in two types 220 V and 24 V and in 7 colors

To see the different types of Start Step Shasti, you can refer to the jbh products page and while reading the details and asking for the price, you can prepare the Start Step Shasti with just a few simple clicks. Meanwhile, if you face any challenges, you can get help from the support team.

 

Introducing the concept of each color in Shasti Start Step

Start step push button is used in electrical panels. These shasti have different colors; Each color is selected according to the command given to the thumb and each one represents a special concept.

In the following, we will fully examine the meanings of Start Step’s thumb colors:

• Green: The green color indicates that the equipment is turned on or started.
• Red: The red color in the normal start-step push button indicates that the devices are turned off, and in the mushroom push button, it means an emergency power cut.
• Yellow: The emergence of an unusual and unconventional state causes the yellow color to lighten.
• White, blue and black: In case of any activity apart from what is mentioned above, the white, blue and black lights will be on.

After getting to know the concept of each color, you will know how the step start key works and you can avoid possible problems.

 

How to install the step start key

After you get Shasti Step Start, you need to install it according to an instruction.

In general, by making a small hole, you can install it on the door of the electrical panel. To create a suitable hole on the thumb, you can use tools such as a punch, a screwdriver or a drill.

The installation method of Start Step thumb types can be different; But installing all of them is easy and is possible without any tools and only by hand pressure.

You can use two different methods to install Shasti Start Step:

• Install the start step in the electrical panel in the manual operation method.
• In the second method, for greater safety and no damage to the keys, place them in a separate compartment and then install them in a standard environment.

For more information, we have explained each of the methods separately in detail.

 

The first method:

One of the most common methods is to install the start step on the surface or the internal panel of the electrical panel. Open the door of the electrical panel and install the equipment directly into the electrical panel.

 

The second method:

In some installations where only one step start switch is needed, you can use a standard box. These boxes are made of different materials such as plastic, aluminum, steel and stainless steel to protect the equipment from possible damage in wet, chemical and sunlight environments.