stabilizer
JBH brand stabilizer (voltage stabilizer) with unique features such as connected display, input indicator, output indicator, main switch, etc. is sold with 3 years unconditional warranty.
29,500,000 $
Availability: 2 in stock
عضویت در خبرنامه JBH
Stabilizer is a device that protects electrical equipment against voltage fluctuations, like an electrical protector, by measuring the input voltage.
And if the voltage increases or decreases, it increases or decreases its value to be in the standard range and transfers it to the output after correction.
Jbh Group produces and supplies all kinds of stabilizers, central power protectors and all kinds of knowledge-based electrical equipment.
| 1 | The use of a ring transformer (chambre) which has very little sound and noise compared to the book type |
| 2 | It has 4 separate earthed sockets |
| 3 | Compact dimensions and quick setup |
| 4 | Keep in mind Over Voltage and Under Voltage |
| 5 | High temperature protection |
| 6 | It has an automatic fuse |
| 7 | It has an on/off switch independent of the fuse |
| 8 | It has an input and output voltage display |
| 9 | It has an RJ45 port for protection and noise reduction of telephone, fax and modem |
| 10 | 12 months warranty |
| 11 | 10 years after-sales service |
| 12 | Both wall and desktop installation |
| 13 | Using SMD board to reduce space |
applications
| 1 | Side and twin refrigerators |
| 2 | automatic doors |
| 3 | Audio and video systems |
| 4 | Computers and game consoles |
| 5 | laboratory equipment |
| 6 | Installation before UPS to increase battery life and reduce device depreciation |
Technical Specifications
| Row | Description |
| 1 | Apparent power: 1500 volts ampere |
| 2 | Active power: 1200 watts |
| 3 | Technology: relay |
| 4 | Control system: microprocessor |
| 5 | Waveform: full sinusoid |
| 6 | Maximum current: 5.6 amps |
| 7 | Instantaneous output current: 15 amps |
| 8 | Fuse: 5 amperes |
| 9 | Cable length: 1.5 meters |
| 10 | Working voltage range 160-255 |
| 11 | Accuracy class: 220 ± 8 volts |
| 12 | Number of stairs: 6 |
| 13 | Voltage of each step: 10 volts |
| 14 | Output voltage correction time: 300 milliseconds |
| 15 | Initial setup time: 30 seconds |
| 16 | Standard:: CE, IS09001, PCT, SGS |
| 17 | Insulation resistance: more than 2 megaohms |
| 18 | “Efficiency ≥90%” |
| 19 | Operating temperature: +15-50 degrees Celsius |
| 20 | Humidity: <85% |
| 21 | Dimensions: length: 34 cm – width: 11 cm – height: 7 cm |
| 22 | Weight: 2.65 kg |
| Row | Description |
| 1 | Connected display means that the outlet or sockets are powered |
| 2 | Display that the input is energized (it should be noted that when the input is energized, the output is connected after 30 seconds.) |
| 3 | Turning on this light means that the display shows the output voltage. |
| 4 | Voltage display (in normal mode, it shows the output regulated voltage, and if you press the red thumb, number 9 next to the input device) |
| 5 | On and off switch |
| 6 | Output sockets |
| 7 | RJ45 port for protection and noise reduction of telephone, fax and modem |
| 8 | Push-in automatic fuse (if the current exceeds the permissible limit by the consumer, this fuse will be cut off, to reconnect the additional consumer must be disconnected from the device and then put in the connected state by pressing the fuse inside) |
| 9 | Input voltage display thumb: If you press the red thumb next to the device, voltage display number 4 shows the input voltage value. |
Installation tips
| 1- The inside of the device is electrified, so never directly service this device. |
| 2- This device should be installed in a place where there is natural air circulation without obstacles. |
| 3- The device should not be exposed to direct sunlight |
| 4- Keep the device away from wet environments and near water. |
The reasons for the importance of stabilizers
First of all, you should know that all electrical appliances are designed and produced according to a specific voltage spectrum; But you should consider that the city voltage has sudden fluctuations and the repetition of these fluctuations can cause serious damage to electrical appliances.
In the following, we point out the damages caused by not using a stabilizer to electrical appliances, so that you can understand their importance:
– Damage to the overall performance of electrical appliances
– The possibility of damage to the insulation in the winding
– Interruption of continuous operation of electricity
– Reducing the useful life of electrical devices
– Interruption of continuous operation of electricity
– Reducing the useful life of electrical devices
Some people think that these damages happen when excessive voltage is applied to electrical devices; But keep in mind that voltage lower than normal also causes damage to electrical devices, which we will mention below.
– Reduces the power of electrical appliances.
– If you have a digital part, the device’s calculations will have problems.
– Reduces the speed of drive motors
– Reduces the speed of drive motors
1 review for stabilizer
Related products
-
voltage protectorFixed three-phase voltage protector
-
voltage protectorPurifier electric protector
-
voltage protectorFixed single-phase voltage protector
-
voltage protector
single phase
1 review for stabilizer
-
سلام لطفا قیمت این استبلایزر 1500 VA تون رو بفرماید . ممنون میشم
پارسا –
سلام لطفا قیمت این استبلایزر 1500 VA تون رو بفرماید . ممنون میشم