Fixed single-phase voltage protector
JBH collection offers a variety of standard and functional electrical equipment such as single-phase fix voltage protectors with a three-year warranty and unconditional replacement.
Notify me when available
3,500,000 $
Availability: 5 in stock
عضویت در خبرنامه JBH
How the fix single phase protector works
The way the single-phase fix protector works in jbh is as follows: if the measured values of voltage and current exceed the standard range, the device will cut off the output power according to the default time, and if the error is fixed, it will reconnect the output power after a specified time. .
For home applications with 25 amp branch, 40 amp voltage protector is suitable. Be careful that a 63 amp protector must be used for 32 and 40 amp branches.
Protections
|
Overvoltage protection
|
Voltage drop protection
|
Definite protection of zero or two phases
|
Protection against surge voltage or lightning
|
Capabilities
|
1.Ability to install on rails
|
2.Reconnect after fixing the error
|
3.Has an error indicator
|
4.Automatic reset capability
|
Applications of fixed single-phase protection
1- Home use: replace one centrally in the fuse box instead of using mobile power protectors
2- Industrial: industrial machines – electric motors – switchboard – compressor – CNC and laser – miners (single-phase consumers)
3- Agriculture: types of submersible and irrigation pumps (single-phase consumption)
Product specification table
| parameters | current suffering | Product Code | Product Name | Shape | |
| over voltage: 250±5V Under Voltage: 170±5V action time: 0.3 Sec Recovery time: 60 Sec |
40A | P22040F0 | VP-1F Voltage Protector Fix type |
|
Technical Specifications
| Voltage supply: 230…400 Vac | 1 | ||||
| operating temperature: -30 … 70 Celsius | 2 | ||||
| frequency : 50Hz/60Hz | 3 | ||||
| Power Consumption : < 2W | 4 | ||||
| electrical life: 100.000 times | 5 | ||||
| Mechanical life: 1.000.000 times | 6 | ||||
| surge protection capacity: 175 Joules | 7 | ||||
| Max current / Spike voltage: 6000A/1.5KV | 8 | ||||
| voltage measuring accuracy : <1% | 9 | ||||
| rated insulation voltage: 600 Vac | 10 | ||||
| protection deegre: IP40 for front panel & IP20 for terminals | 11 | ||||
| pollution degree: 3 | 12 | ||||
| operation position :any | 13 | ||||
| over voltage category: III | 14 | ||||
| Install way: DIN-rail mounting | 15 | ||||
| Efficiency : 97% | 16 | ||||
| Warranty : 3 years | 17 | ||||
| Altitude above sea: no more than 2000 m | 18 | ||||
| humidity : <90% | 19 | ||||
| category : AC7-a | 20 | ||||
| action time: <300ms | 21 | ||||
Installation schematic
Tips for installing single-phase fix protector
1- It is recommended to use an expert for installation and settings
2- It is recommended to use an original miniature fuse and a current leakage protector before the protector.
3- According to the above figure, the input phase should be connected to L and the input neutral to N, and in the same way, the output neutral should be connected to the null ingot and the output phase should be connected to the input of the miniature fuses.
4- To connect the wire to the device, be sure to use the appropriate wire head
5- Make sure the connections are tight because loose connections cause heat and fire.
Dimensions of fixed single-phase voltage protector
Appearance characteristics of fixed single-phase voltage protector
Breakdown diagram of fixed single-phase voltage protector
Reviews
There are no reviews yet.
Related products
-
voltage protectorFixed three-phase voltage protector
-
voltage protectorPurifier electric protector
-
voltage protectorstabilizer
-
voltage protector
single phase
Reviews
There are no reviews yet.