Eco Thermostat

Eco thermostat is one of the practical and important products, whose existence is necessary in all office, commercial and residential environments.

It is good to know how to set up this product is very simple and can be easily set up by just pressing a few buttons. This thermostat has the ability to measure temperature from -50 degrees to +120 degrees Celsius; Also, the measurement accuracy of this thermostat is 0.1 degrees Celsius.

In the following, we will fully review the details of this product.

 

In the following, we will fully review the details of this product.

For many years, jbh group has been operating in the field of producing various electrical equipment such as signal lights, eco thermostats, and macro thermostats, and during all these years, with the help of its technical team, it offers the highest quality knowledge-based products with a three-year warranty and unconditional replacement.

One of the equipments that jbh has a special expertise in producing is the Eco thermostat, which we will briefly review below.

• Temperature measurement range: +120 to -50 degrees Celsius
• Measurement accuracy: 0.1 degrees Celsius
• Power supply: VAC 220
• Measuring sensor: NTC 10K waterproof
• Output relay current: 10 amps
• Device working temperature: +60 to -10 degrees Celsius
• Operating humidity of the device: 20 to 85 percent
• Dimensions of the front frame: length 78 mm, width 40 mm and depth 24 mm.
• Back bezel size: 69mm long and 37mm wide

 

How to set the eco thermostat

Setting the set point temperature to turn off and on the relay is as follows: press and release the SET button for 3 seconds. The lower number, which is the set temperature of the user, is marked with blue color and changes state by flashing; Then with both up and down buttons, the value of this parameter can be increased and decreased. This thermostat has 9 functions P0 to P8. Hold the SET key for 10 seconds until P0 appears. Release the key and then cycle through the functions each time you press the SET key. To value each of these 9 functions, use the up and down buttons to increase and decrease the numerical value of the parameter. Hold the SET key for a few seconds to save the set values.

 

Introducing Eco thermostat functions

Eco thermostat has different functions which are applied by different keys. In order to be able to fully use the function of the device, you need to first know each of them in full detail so that there is no problem during use.

In the following, we will examine some functions of the Eco thermostat.

P0: cooling (H) heating (C)

P1: Setting the differential temperature value

(For example, if you set the set point number to 25 degrees and the differential temperature to 2 degrees in the heating mode, and the ambient temperature is 20 degrees, the relay is connected to bring the temperature to 25 + 2; after reaching the temperature of 27, the relay is disconnected. And if the temperature drops below 25 degrees, this cycle is repeated again. In general, the JBH eco thermostat constantly maintains the temperature between 25 and 27.)

P2: limiting the set point by setting the maximum set point

P3: limiting the set point by setting the minimum set point

P4: Calibrate the current temperature

P5: setting the delay time in connecting the relay when the set point and the current temperature are equal (for compressors, refrigerators, etc.)

P6: Set the display of the upper limit of the current temperature and enable or disable it

P7: Locking set point settings

P8: factory settings (turn on parameter P8 and do not press any button for a few seconds)

If it is a bit difficult for you to understand the mentioned concepts, you can ask the collection experts for guidance after purchasing and ask them to explain each of the functions comprehensively.

 

Buy eco thermostat

To buy electrical equipment such as eco thermostat, be sure to choose reliable and reliable collections to be sure of the authenticity and quality of the products; Because electrical equipment plays an important role in the health and safety of the environment, and if you buy unsafe products, there is a possibility of irreparable damages; Therefore, be sure to do enough research before buying.

Before buying, make sure about the authenticity, quality and brand of the product.

Keep this point in mind, the mentioned items directly affect the price of the eco thermostat; Because an original and high-quality product from a famous brand is more expensive than fake, low-quality and unfamiliar products.

In the end, as a final point, we should remind you that in order to gain your satisfaction and trust and to prove its goodwill, jbh offers all its electrical products and equipment with a three-year warranty and unconditional replacement.

To buy the above product, just go to the jbh website and find Eco thermostat in the product section, pay the desired amount and wait for its delivery.