automatic single phase contactor
Automatic Single Phase Contactor
In terms of quality, beauty, amperage, low noise and no need for seasonal maintenance, the JBH single-phase automatic contactor is a very suitable alternative to commanding single-phase consumers or other old electrical equipment.
Among the applications of JBH single-phase automatic contactor, we can mention the low noise of disconnection and connection, the reduction of the dimensions of the electrical panel, the number of disconnection and connection times.
3,350,000 $ – 6,700,000 $
عضویت در خبرنامه JBH
instruction
The use of old contactors due to their large size brings problems such as lack of space in the electrical panel, which JBH has solved this problem by producing single-phase contactors in miniature dimensions, which in addition have advantages such as saving space and cost. comes with
Application
Product specification table
| diagram | Contact status | Coil voltage (supply) | current suffering | Product Code | Product Name | Shape |
 |
2NO | 220VAC
24VDC |
AC-7b: 8A
AC-7a: 25A |
“CA2-025-20-A CA2-025-20-D”
|
“Single phase contactor 25 amp simple Contactor 25A-2P-Auto |  |
 |
1NO+1NC
|
220VAC
24VDC |
AC-7b: 8A
AC-7a: 25A |
“CA2-025-11-A CA2-025-11-D”
|
“Single phase contactor 25 amp simple Contactor 25A-2P-Auto | |
Product specification table
| diagram | Contact status | Coil voltage (supply) | current suffering | Product Code | Product Name | Shape |
 |
2NO | “220VAC”
|
AC-7b: 15A 20A
AC-7a: 40A 63A |
“CA2-040-20-A CA2-063-20-A”
|
Contactor 63A-2P-Auto single-phase contactor 40-63 amperes
|
 |
Contactor selection
Technical data
| No | Description |
| 1 | Voltage supply: 180-250 Vac- 12…24VDC |
| 2 | operating temperature: -40 … +70 Celsius |
| 3 | frequency : 50Hz/60Hz |
| 4 | Power Consumption : < 1.5W |
| 5 | Electrical life: 100.000 times |
| 6 | Mechanical life: 1.000.000 times |
| 7 | Standard : IEC60947 – En 61095 |
| 8 | rated insulation voltage: 500 Vac |
| 9 | protection deegre: IP40 Device in modular enclosure & IP20 Device only |
| 10 | Install way: DIN-rail mounting |
| 11 | Warranty : 3 years |
| 12 | humidity : <95% at 55 Celsius |
| 13 | category : AC7-a |
| 14 | action time: <300ms |
| 15 | “Installation conditions: The installation position shall be vertical, and the inclination in each direction shall not exceed ± 5°” |
| 16 | “Addition conditions : Pull in voltage under operating conditions (85% – 110%) Us; The release voltage is (20% – 75%) Us.” |
Installation tips:
Dimensions: out line dimension
25 amp contactor
40 and 63 amp contactors
| Contactor 2 poles 220 volts automatic 63 amps | Number of boxes: 6 Quantity in carton: 90, 1140001 |
|---|---|
| Order code | Contactor 2 bridges 63 amp _120701, Contactor 2 poles 25 amps one open one close _12070002, Contactor 2 pole 25 amp double open _ 12070001, Contactor 2 poles 40 amp _120703 |
| Contactor 2 poles 220 volts automatic 25 amps | Number of boxes: 12 Quantity in carton: 180, 12070001, 12070002 |
| Contactor 2 pole 40 amp 220 volt automatic | Number of boxes: 12 Quantity in carton: 180, 120703 |
Reviews
There are no reviews yet.
Related products
-
single phase contactorsSingle phase contactor with key (manual)
Reviews
There are no reviews yet.