Humidity temperature controller

دما رطوبت

Humidity temperature controller

JBH humidity temperature controller

Humidity temperature controller, in addition to displaying temperature and humidity values, performs temperature control in two modes of cooling and heating and humidity control in two modes of dehumidifier and dehumidifier.

 

Click on Telegram to receive advice, price inquiries and buy this product online.

Click on Telegram to receive advice, price inquiries and buy this product online.

 

Humidity temperature controller and technical specifications

Temperature measurement range: +110 + 50 ° C

Humidity measurement range: 99%. ۰

Resolution: 0.1

Measurement accuracy: 1.

Power supply: 220 Vac

Output relay current: 220 Vac 10A

 

Humidity Temperature Controller

Product Name
STC3028 Order Code
Cooling/Heating

Dehumidify/Humidify

 

Operation Modes
-50°c…..+110°c Measuring Range
0.1°c Resolution
±1°c Accuracy
220 VAC Power Supply
Digital Sensor Type
1 Reley 10A Temperature / 1 Reley 10A Humidity Output
-10°c …+60°c Operation Temperature
34mm*75mm Front Panel Dimension
28mm*70mm Rear Panel Dimension

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Humidity temperature controller and how to apply the settings

Set the temperature point set to disconnect and connect the relay

Buttons number 1 are related to setting the start time and temperature relay step. The ˄ button is for setting the starter temperature or connecting the relay and the و button is for setting the step temperature or disconnecting the temperature relay. Each time you press these buttons, the values ​​set by the user are displayed. Now to change the settings of the relevant button To set the starter temperature, hold for a few seconds until the seven temperature-related segments flash. After the number flashes, set the starter temperature to the desired temperature with the number 1 buttons. After setting the starter temperature, wait a few moments for the device to automatically save the changes. Do the same process to adjust the step temperature.

Setting the humidity point set to disconnect and connect the humidity relay

Buttons number 2 are related to setting the start time and step of the humidity relay. The ˄ button is for setting the humidity of the starter or the same as connecting the relay and the button ˅ is for setting the humidity of the step or disconnecting the humidity relay. Each time these buttons are pressed for a moment, the values ​​set by the user are displayed. Hold down the starter humidity adjustment button for a few seconds until the seven humidity segment flashes. After the number flashes, set the starter humidity to the desired humidity with the number 2 buttons. After setting the starter humidity, wait a few moments for the device to automatically save the changes. Do the same process to adjust the step moisture.

Calibrate temperature and humidity values

Press the number 1 buttons at the same time until the temperature number flashes. After flashing with the same keys, calibrate the temperature. Press the number 2 buttons at the same time until the humidity number flashes. After flashing, calibrate the humidity with the same keys.

 

Click to see other products in the field of display and temperature control.

× How can I help you?