AC single phase power meter
AC single phase power meter
The AC Modbas single-phase power meter provides voltage, current, frequency, cosine, power and energy parameters with very high accuracy on the RS485 platform under the MODBUS RTU protocol. In addition, this product is able to store energy consumption in KWh. In case of power outage, energy consumption (KWh) is saved and will not be reset. If the power consumption exceeds the set amount, the device will automatically send an alarm bit. The small dimensions and very high accuracy of this product have attracted the attention of industrial automation activists.
Technical specifications of AC single phase power meter
Voltage
Voltage measurement range: 260-80 volts
Voltage display format: 260.0 – 80.0 volts
Voltage measurement accuracy: 0.5%
current
Current measurement range: Type 10 (0 to 10 amps without CT) / Type 100 (0 to 100 amps with CT)
Stream display format: 99.999-0
Flow measurement accuracy: 0.5%
Active power
Active power measurement range: Type 10 (0 to 2.3 kW) / Type 100 (0 to 23 kW)
Resolution: 0.1 watt
Energy consumption
Energy consumption measurement and storage range: 09999.99 – 0 kWh
Measurement accuracy: 0.5%
Resolution: 1 watt hour
Frequency
Frequency measurement range: 65-45 Hz
Measurement accuracy: 0.5%
Resolution: 0.1 Hz
cosine Fi
Measurement range: 1-0
Measurement accuracy: 1%
Resolution: 0.01
Dimensions of the front frame: length 90 mm, width 60 mm
Dimensions of the rear frame: length 90 mm, width 60 mm
Depth: 28 mm
The table of Madbas addresses is provided in the catalog along with the product.
Online communication in Telegram to receive online advice and purchase goods
Online communication in Instagram to receive online advice and purchase goods