Triple signal signal JBH

چراغ سیگنال ولت امپر فرکانس

Triple signal signal JBH

Triple signal signal JBH

 

The JBH triple signal light, or frequency-ampere signal light, shows you 3 volt, ampere, and frequency parameters simultaneously on one screen. The measuring range of the Triple Signal LED product is 0-100 amps, 1200-500 volts and 0-100 Hz, and it is offered with the highest quality and lowest price.

 

Our main goal is your true satisfaction. Your satisfaction depends on a pleasant purchase from GBH. Enjoy the purchase if you like the JBH triple signal light emotionally and logically.

Click to contact the JBH consulting team, inquire about the price and buy this product online on Telegram and Instagram.

 

Triple JBH signal lights and the good feelings it gives you

  1. The stunning beauty of the JBH triple signal light
  2. Raise your class and work
  3. Variety in round and square frames
  4. Variety in colors red yellow green white blue
  5. Easy installation cut (22 mm punch like old signal lights)
  6. Convenient and easy replacement with old signals
  7. Very high accuracy

Triple JBH signal light and logical justification for its use

  1. JBH Triple Square Signal Lamp A combination of signal lamp, voltmeter, ammeter, frequency meter
  2. Much smaller dimensions, higher accuracy and much lower cost than three-phase panel multimeters (no frame depth involved and cost savings on electrical panel frames, no need for panel CTs)
  3. Voltage display in the range of 12 to 500 volts AC to be aware of the normal conditions of the input voltage or double voltage of your equipment
  4. Display current in the range of 0 to 100 amps AC to be aware of the normal flow conditions of your equipment
  5. Frequency display in the range 0 to 100 Hz
  6. Use in single-phase or three-phase network up to 100 amps
  7. Unconditional 6-month replacement warranty from the time of installation

 

Triple JBH signal lights and how to install

Single phase network

Give phase and zero to pins X1 and X2 of the JBH square triple signal light to turn on the signal light and show you the voltage and frequency. Then, to show the consumer current, connect the current transformer (CT) to the body of the signal lamp and pass the fuzzy wire whose current you want to measure the current only through the current transformer.

Three phase network

Mode 1: We use 3 signal lights for three phases. In this way, signal phase R and zero to pins X1 and X2 of the signal light so that the signal light turns on and shows you the frequency and voltage of phase R relative to zero. Then, to show the current of phase R, connect the current transformer (CT) to the body of the signal lamp and pass the phase R wire that you want to measure the current only through the current transformer. For phases S and T, exactly according to the previous procedure we do .

Mode 2: We use 3 signal lights for three phases. In this way, signal phase R and phase S to the pins X1 and X2 of the signal light until the signal light turns on and gives you the frequency and line voltage of phase R and S. Show. Then, to show the R-phase current, connect the current transformer (CT) to the body of the signal lamp and pass the R-phase wire that you want to measure the current only through the current transformer. For line-to-line voltage, phases S and T and line voltage. Follow the S and R phase lines exactly as before.

 

See other JBH signal lights.

 

Technical specifications of JBH square triple signal light

Square Triple Indicator Lamp

Product Name

(JRAD16-22AVHz-S-(RD-YL-GR-WH-BL

Order Code

12-500V    0-100A   0-100Hz

Measuring Range

1%

Accuracy

22mm

Diameter

Self Power

Power Supply

50+ ……20-

Ambient Temp

(R-O-G-B-W)

Colors

30.000Hour<

Life Time

60cd/m2<

Brightness

Plastic

Body Material

120°

Beam Angel

54/20

(IP(Front/Back

10pcs

QTY:Per CTN

90%

R.Humidity

× How can I help you?