JBH single phase current voltage protector

Single-phase current voltage protector that accommodates 4 products.

1. Voltage protector

2. Load control relay

3. Voltage indicator

4. Current transformer (CT)

Features of Amprollet Protector or Current Voltage Protector or CVP

1. Voltage protector: protection against voltage fluctuations by adjusting the upper and lower voltage limits.

2. Current protection: protection against current excess by setting the upper limit of the current.

3. Timer: Set the cut-off delay time and the separate connection delay time for each of the 3 errors.

4. Display: display voltage and current digitally and equipped with internal CT.

5. Adjust the recovery voltage up and down.

6. Set the initial setup time of the device.

Fast and attractive video introduction

Why JBH power protector?

What is voltage protection?

Equipment needs several conditions to start up and function normally. One of these conditions is normal voltage. For example, consider a printer on your desk. The license plate contains information. The supply voltage should probably be between 220-240 volts. The miner mentioned on the power supply that the operating voltage should be between 210-240 volts. This indicates a warning from the device manufacturer that its input voltage is normal. But what happens if Does the input voltage to the equipment decrease or increase from 220 volts normal? For various reasons, the mains electricity sometimes drops or increases. This leads to damage. What is the solution?

Approach

The solution is to use equipment that is located between the input power and the equipment. A device that instantly checks the voltage. In case of power fluctuations, cut off power so as not to damage the equipment.

The name of this protection device is electric protector or protector. There are many electrical protectors in the market with different brands. These protectors are generally non-adjustable.

JBH Power Protector, or JBH Single-Phase Current Voltage Protector, is a very intelligent adjustable voltage protector. This product allows you to adjust the low voltage from 140 to 210 volts. Adjust 230 volts to 300 volts. It is also digital.

What is current protection?

One of the normal conditions for electrical and electronic equipment to work is the amount of current it consumes. In fact, equipment should not consume more current than it consumes. Excessive current consumption means that there is a malfunction in the system that causes the equipment to burn out. So it is better to fix the problem before the device burns out.

Approach

With the JBH power protector, you have a single-phase voltage surge protector that adjusts the upper limit of the current.

Click for complete technical information on single-phase voltage protection.

سایت مرتبط